Thiết bị chuyển mạch Switch H3C S5120V2-52P-PWR-LI
Thiết bị chuyển mạch Switch H3C S5120V2-52P-PWR-LI
Specifications
Feature | S5120V2 -10P-LI |
S5120V2 -20P-LI |
S5120V2 -28P-LI |
S5120V2 -52P-LI |
S5120V2 -10P PWR LI |
S5120V2 -28P PWR LI |
S5120V2 -28P HPWR -LI |
S5120V2 -52P PWR-LI |
Switching capacity | 20Gbps | 40Gbps | 56Gbps | 104Gbps | 20Gbps | 56Gbps | 56Gbps | 104Gbps |
Packet forwarding rate | 15Mpps | 30Mpps | 41.7Mpps | 77.4Mpps | 15Mpps | 41.7Mpps | 41.7Mpps | 77.4Mpps |
Dimensions (H × W × D) | 43.6× 266 × 161 mm |
43.6× 330× 230 mm |
43.6× 440 × 160 mm |
43.6× 440 × 230 mm |
43.6× 330 × 230 mm |
43.6× 440 × 260 mm |
43.6× 440 × 260 mm |
43.6× 440 × 260 mm |
Weight | ≤ 1.5kg | ≤ 2kg | ≤ 2.5kg | ≤ 3.5kg | ≤ 3kg | ≤ 4kg | ≤ 4.5kg | ≤ 6kg |
Console ports | 1 | |||||||
Fixed ports | 8*10/100 /1000TX |
16*10/10 0/1000TX |
24*10/10 0/1000TX |
48*10/10 0/1000TX |
8*10/100 /1000TX |
24*10/10 0/1000TX |
24*10/10 0/1000TX +4*10/10 0/1000 BASE-T Combo |
48*10/10 0/1000TX |
+2*SFP | +4*SFP | +4*SFP | +4*SFP | +2*SFP | +4*SFP | + 4*SFP | +4*SFP | |
Input voltage range | 100 VAC to 240 VAC @ 50 Hz/60 Hz | AC: 100-240V @50/60Hz |
||||||
DC: -48V~-60V | ||||||||
Power consumption | MIN: 7W MAX: 12W |
MIN: 9W MAX: 19W |
MIN: 9W MAX: 23W |
MIN: 18W MAX: 41W |
MIN: 13W MAX:153 W (PoE 125W) |
MIN: 19W MAX: 240W(Po E 1 70W) |
MIN: AC: 23W DC: 16W MAX: AC: 446W (PoE 370W ) DC: 790W(PoE 740W) |
MIN: AC: 36W DC: 26W MAX: AC: 467W (PoE 370W) DC: 807W(PoE 740W) |
Operating temperature | 0ºC to 45ºC | |||||||
Operating humidity | 10% RH to 95% RH, non-condensing | |||||||
Stacking | Intelligent Resilient Framework 2 (IRF2) | |||||||
Link aggregation | 1G/10GE port aggregation Static aggregation Dynamic aggregation Multichassislink aggregation |
|||||||
Jumbo frame | Supported | |||||||
MAC address table | Blackhole MAC Address MAC learning limit |
|||||||
Flow control | 802.3x flow control and half-duplex backpressure | |||||||
VLAN | Port-based VLANQinQ Voice VLAN MAC VLAN |
H3C S5120V2-LI Gigabit Access Switch Series
6
ARP | ARP Detection ARP speed limit |
ND | Supported |
VLAN virtual port | Supported |
DHCP | DHCP Client DHCP Snooping DHCP Relay DHCP Server DHCP Option82 |
DNS | Static and Dynamic DNS IPV4 and IPV6 |
Routing protocols | IPV4/IPV6 static routing RIP/ RIPng, OSPFV1/V2/V3 |
Multicast | IGMP Snooping V1/V2/V3 MVR |
Strom suppression | Storm suppression based on port bandwidth percentage Storm suppression based on PPS |
Layer 2 ring network protocol | STP/RSTP/MSTP STP Root Protection Smart Link RRPP |
Mirroring | Flow mirroring Port mirroring |
QoS/ACL | Packet filter Flexible queue scheduling algorithms based on ports and queues, including SP, WRR and SP+WRR Bidirectional ACL Port-based speed limit Flow redirection Time-range |
Security | Hierarchical user management and password protection MAC-based authentication 802.1X SSH2.0 Port isolation IP source guard HTTPs EAD |
IEEE | IEEE 802.3x IEEE 802.3ad IEEE 802.3af IEEE 802.3at IEEE 802.1p IEEE 802.1x IEEE 802.1q IEEE 802.1d IEEE 802.1w IEEE 802.1s |
Loading and upgrading | Loading and upgrading through FTP/TFTP |
H3C S5120V2-LI Gigabit Access Switch Series
Management and maintenance | Configuration from CLI Login through Telnet, and the console port SimpleNetwork Management Protocol(SNMP) RemoteMonitoring (RMON) IMC network management system WEB management System log Alarming based on severity IRF NTP Debugging information output Telnet-based remote maintenance NQA DLDP Virtual Cable Test |