-15%

Thiết Bị Mạng Wifi Cisco AIR-AP2802E-S-K9

17.500.000 VNĐ

AIR-AP2802E-S-K9 – Cisco Aironet 2802E Access Point, 802.11ac Wave 2 AP w/CleanAir, 4×4:3, External Antenna, 2xGbE, S Regulatory Domain, Configurable

Bảo hành: 24 Tháng

Nhà Thầu Điện Nhẹ - Cung cấp thiết bị điện nhẹ - Giải pháp an ninh, Mạng Wifi, Văn phòng CTY, chung cư tòa nhà, Nhà xưởng, resort…

Hotline: 0989 57 56 56 Tư vấn miễn phí ĐẶT HÀNG ONLINE Giao hàng nhanh chóng. MIỄN PHÍ <10KM

Mô tả

Thiết Bị Mạng Wifi Cisco AIR-AP2802E-S-K9

AIR-AP2802E-S-K9C Datasheet
Get a Quote
Overview
AIR-AP2802E-S-K9C is one of the Cisco Aironet 2800 Series Access Points. This 2800 series, delivering new 802.11ac Wave 2 standard, is ideal for
large enterprise organizations that rely on Wi-Fi to engage with customers. The Series is a hands-off product that’s intelligent enough to make
decisions based on end-device activities and usage. AIR-AP2802E-S-K9C provides external antenna and S regulatory domain. It also supports
configurable Dual-band controller-based 802.11a/g/n/ac.
Quick Specs
Table 1

Product Code	AIR-AP2802E-S-K9C
Feature	Dual-band controller-based 802.11a/g/n/ac, configurable
Frequency band and 20-MHz operating channels	S (S regulatory domain): – 2.412 to 2.472 GHz; 13 channels – 5.180 to 5.320 GHz; 8 channels – 5.500 to 5.700 GHz;, 11 channels – 5.745 to 5.825 GHz; 5 channels
Antenna	External Antenna
Features	– 4×4 MU-MIMO with three spatial streams – MRC – 802.11ac Beamforming – 20-, 40-, 80, 160-MHz channels – PHY data rates up to 5.2 Gbps – Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx) – 802.11 DFS – CSD support
Interfaces	– 2 x 100/1000BASE-T autosensing (RJ-45) – Management console port (RJ-45) – USB 2.0 (enabled via future software)
System memory	– 1024 MB DRAM – 256 MB flash
Dimensions (W x L x H)	8.66 x 8.77 x 2.50 in.
Net Weight	4.6 lb (2.09 kg)

Thiết Bị Mạng Wifi Cisco AIR-AP2802E-S-K9

Product Details
Figure 1 shows the face of AIR-AP2802E Model.
Notes:

(1)	Dual-band antenna connector A with antenna	(4)	Dual-band antenna connector C with antenna
(2)	Location of the Smart antenna connector port on the right side of the AP	(5)	Status LED
(3)	Dual-band antenna connector D with antenna	(6)	Dual-band antenna connector B with antenna

Thiết Bị Mạng Wifi Cisco AIR-AP2802E-S-K9

Figure 2 shows the Smart Antenna Connector and DART cable on the AIR-AP2802E model.
The 2802E model has a Smart antenna connector, which is connected directly to the flexible radio. Without a supported external antenna
connected to the Smart Antenna connector, the flexible radio can stay only in 2.4 GHz mode. If an external antenna is connected, the flexible
radio can be used in the full Flexible Radio Assignment mode, allowing dual 5 GHz and Wireless Security Monitoring modes.
To connect to any supported RP-TNC connector-type external antenna to the Smart antenna connector, use the DART cable connector AIRCAB002-DART-R=, which is to be ordered separately.
Compare to Similar Items
Table 2 shows the comparison between two AP.

Models	AIR-AP2802E-T-K9	AIR-AP2802E-S-K9C
Feature	Dual-band controller-based 802.11a/g/n/ac	Dual-band controller-based 802.11a/g/n/ac, configurable
Frequency band and 20-MHz operating channels	T (T regulatory domain): – 2.412 to 2.462 GHz; 11 channels – 5.280 to 5.320 GHz; 3 channels – 5.500 to 5.700 GHz; 8 channels (excludes 5.600 to 5.640 GHz) – 5.745 to 5.825 GHz; 5 channels	S (S regulatory domain): – 2.412 to 2.472 GHz; 13 channels – 5.180 to 5.320 GHz; 8 channels – 5.500 to 5.700 GHz;, 11 channels – 5.745 to 5.825 GHz; 5 channels
Antenna	External Antenna	External Antenna
Features	– 4×4 MU-MIMO with three spatial streams – MRC – 802.11ac Beamforming – 20-, 40-, 80, 160-MHz channels – PHY data rates up to 5.2 Gbps – Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx) – 802.11 DFS – CSD support	– 4×4 MU-MIMO with three spatial streams – MRC – 802.11ac Beamforming – 20-, 40-, 80, 160-MHz channels – PHY data rates up to 5.2 Gbps – Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx) – 802.11 DFS – CSD support

Thiết Bị Mạng Wifi Cisco AIR-AP2802E-S-K9

Cisco Unified Wireless Network Software Release 8.2.111.0 or later Cisco IOS®XE Software Release 16.3	Software
Cisco 2500 Series Wireless Controllers, Cisco Wireless Controller Module for ISR G2, Cisco Wireless Services Module 2 (WiSM2) for Catalyst®6500 Series Switches, Cisco 5500 Series Wireless Controllers, Cisco Flex ® 7500 Series Wireless Controllers, Cisco 8500 Series Wireless Controllers, Cisco Virtual Wireless Controller Cisco Catalyst 3850 Series Switches, Cisco Catalyst 3650 Series Switches Cisco Mobility Express	Supported wireless LAN controllers
4×4 MIMO with three spatial streams Maximal ratio combining (MRC) 802.11n and 802.11a/g beamforming 20- and 40-MHz channels PHY data rates up to 450 Mbps (40 MHz with 5 GHz) Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx) 802.11 dynamic frequency selection (DFS) Cyclic shift diversity (CSD) support	802.11n version 2.0 (and related) capabilities
4×4 MIMO with three spatial streams MRC 802.11ac beamforming 20-, 40-, and 80-MHz channels PHY data rates up to 1.3 Gbps (80 MHz in 5 GHz) Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx) 802.11 DFS CSD support	802.11ac Wave 1 capabilities
4×4 MU-MIMO with three spatial streams MRC 802.11ac beamforming 20-, 40-, 80, 160-MHz channels PHY data rates up to 5.2 Gbps Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx) 802.11 DFS CSD support	802.11ac Wave 2 capabilities
2.4 GHz, gain 4 dBi, internal antenna, omnidirectional in azimuth 5 GHz, gain 6 dBi, internal directional antenna, elevation plane beamwidth 90° 5 GHz, gain 5 dBi, internal antenna, omnidirectional in azimuth Flexible radio (either 2.4 GHz or 5 GHz) Dedicated 5-GHz radio	Integrated antenna
2802e Series access points are certified for use with antenna gains up to 6 dBi (2.4 GHz and 5 GHz) Cisco offers the industry’s broadest selection of antennas, delivering optimal coverage for a variety of deployment scenarios	External antenna (sold separately)
Available on the 2802e Series access points only Requires the AIR-CAB002-DART-R= 2 ft smart antenna connector to RP-TNC connectors to connect a second antenna to the access point Required when running the flexible radio as either a second 5-GHz serving radio or Wireless Security Monitoring radio	Smart antenna connector
2802I/E Management console port (RJ-45) USB 2.0 (enabled via future software) ◦ 2×100/1000BASE-T autosensing (RJ-45)	Interfaces
AIR-AP2802E-S-K9C Specification

Specification

Status LED indicates boot loader status, association status, operating status, boot loader warnings, boot loader errors	Indicators
Access point (without mounting brackets): 2802I: 8.66” x 8.68” x 2.17”, 2802E: 8.66” x 8.77” x 2.50”	Dimensions (W x L x H)
3.53 lb (1.6 kg) 4.6 lb (2.09 kg) Cisco Aironet 2802i Cisco Aironet 2802e	Weight
802.3at PoE+, Cisco Universal PoE (Cisco UPOE®) 802.3at power injector (AIR-PWRINJ6=)	Input power requirements
26W at the PSE with all features enabled except for the USB 2.0 port 30W at the PSE with the USB 2.0 port enabled	Power draw
Nonoperating (storage) temperature: -22° to 158°F (-30° to 70°C) Nonoperating (storage) altitude test: 25˚C, 15,000 ft. Operating temperature: 32° to 104°F (0° to 40°C) Operating humidity: 10% to 90% (noncondensing) Operating altitude test: 40˚C, 9843 ft. Nonoperating (storage) temperature: -22° to 158°F (-30° to 70°C) Nonoperating (storage) altitude test: 25˚C, 15,000 ft. Operating temperature: -4° to 122°F (-20° to 50°C) Operating humidity: 10% to 90% (noncondensing) Operating altitude test: 40˚C, 9843 ft. Cisco Aironet 2802i Cisco Aironet 2802e	Environmental
1024 MB DRAM 256 MB flash	System memory
Warranty	Limited lifetime hardware warranty

VHCO Chuyên Phân Phối cũng cấp thiết bị, lắp đặt tư vấn giải pháp Hệ Tống Camera An Ninh, Tổng Đài IP – Analog, Cisco

Hệ Thống Chuông cửa có hình,, chuông cửa IP – Analog, Hệ thống âm thanh, Camera trọn bộ, Thiết bị lưu trữ Nas…. Giải pháp Mạng Lan – Wifi, Wifi Maketing. Hội Trường Tòa Nhà, Trường Học…